Jeep Rebuilt Car/Truck Engines Catalog

Jeep vehicles are more or less conventional SUVs at their core. Their engines are capable of negotiating even the most difficult of paths. It is not necessary that the engines of the Jeep are not able to minimize fuel consumption. In some Jeeps multi displacement system is used which allows half of the cylinders in an engine to be deactivated when the vehicle doesn't need a lot of power. In gasoline powered Jeep engines the oxygen sensor measures the amount of remaining oxygen in the exhaust gas. Based on an analysis of the oxygen volume indicating too much fuel (rich) or too little fuel (lean), an adjustment of the air/fuel mixture to be fed to the engine is carried out by the engine management computer. A proper mixture ratio of air and fuel is converted into mechanical energy by the engine. This results in achieving maximized fuel economy if the oxygen sensor is working properly.

A lot of specialized machining is done in the case of Jeep rebuilt engines to ensure that every part works well. The cylinder channels are re-bored. The pistons are accordingly fitted to match the larger cylinders. All bearings are carefully smoothed and lubricated. The crankshaft or camshaft is reground, heads resurfaced. The connecting rods are precision machined and precisely gauged. The steel abrader is made use of to clean the engine casting. With the use of an electro magnet and fluxing powder, cylinder heads and crankshafts are checked for any signs of cracks. According to the new pistons being installed the cylinder blocks are rebored to the same size.

Then the process of precision honing the cylinder blocks with a diamond honing technique is initiated. This process gives a clearance between the cylinder wall and the piston. The crankshafts are cleaned extremely well through each individual oil gallery. The cylinder heads are then machined to accept new valves, valve springs, valve keepers and high temperature seals. The cylinder block, crankshaft, connecting rods, and assembled cylinder heads are assembled into a long block. After installing a new camshaft and timing components the cylinder heads are installed on the short block. After which, all new rocker arms, hold down bolts, push rods and lifters are carefully installed to complete the long block.

We offer the best rebuilt Jeep engines built by trusted engine specialists. We ensure that our rebuilt Jeep engines meet and exceed all original manufacturers' specifications. We take pride in ensuring that we deliver consistent quality and affordable rebuilt Jeep engines. Our stringent remanufacturing standards have enabled us to achieve one of the lowest failure rates.

To read more about Rebuilt Car/Truck Engines Store, please visit our Information page.